In stock · Sheet
Polycarbonate sheet, cut to size
Transparent sheet for guards, covers, and windows. We cut blanks from 48 × 48 inch TUFFAK GP sheet.
Also stocked: Delrin sheet

Overview
Polycarbonate is the other sheet on the shelf beside Delrin. Shops use it when the part has to take a hit, or when someone has to see through it. It is a poor sliding material. Wear strips and gears belong on acetal.
The sheet on this page is TUFFAK GP. Its technical data sheet describes a polished, UV-stabilized, transparent polycarbonate. It can craze when it meets the wrong solvent or alkali. If the part lives in a chemical splash, or the print names a different grade, say so on the request.
Shelf stock is transparent sheet, 48 × 48 inches, at 0.118, 0.177, and 0.236 inch. Another thickness, size, color, or grade is a sourcing request.
Key properties
Figures are typical published values for unfilled grades, for orientation only. They are not a mill certificate and they are not a promise for the lot on your order. Confirm the datasheet for the sheet you receive. Continuous service temperatures are typical long-term ratings from sheet datasheets, and heat deflection is a different, higher number. Read the temperature guide.
| Property | Value |
|---|---|
| Polymer | Polycarbonate (PC). Shelf stock is TUFFAK GP. |
| Form we stock | Sheet, cut to your blank. |
| Density | About 1.20 g/cm³ for unfilled polycarbonate. |
| Tensile strength at yield | About 55–70 MPa for unfilled polycarbonate. |
| Stiffness | Flexural modulus about 2.2–2.4 GPa. Softer in bending than unfilled acetal. |
| Impact | High. This is the reason to pick it over acetal when the part gets knocked. |
| Clarity | Shelf stock is transparent. The TUFFAK GP technical data sheet lists 86% light transmission for clear sheet at 0.118 inch. |
| Water absorption, 24 h | About 0.15%. |
| Continuous service temperature | About 100–120°C long-term, depending on grade. Heat deflection is about 130–135°C at 264 psi, which is not a long-term rating. Confirm the grade. |
| Sunlight | The TUFFAK GP technical data sheet describes the sheet as UV stabilized. Use that sheet before you specify it outdoors. |
| Chemicals | Holds up to water and many dilute chemicals. Some solvents, oils, and alkalis can craze or crack it. |
| Thicknesses in stock | 0.118, 0.177, and 0.236 inch. |
| Full sheet sizes | 48 × 48 inches. |
| Grade | TUFFAK GP, transparent. The technical data sheet is linked on this page. |
Spec sheets
Technical
Technical data sheet (PDF, opens in a new tab)TUFFAK GP polycarbonate sheet.
Best for
- Machine guards, safety shields, and enclosures. Impact strength is very high.
- Sight windows and inspection covers. Shelf stock is transparent.
- Housings and panels that may be dropped or struck.
- Electrical insulating covers. Flame rating depends on grade, so confirm it if it matters.
- Outdoor glazing. The TUFFAK GP technical data sheet describes the sheet as UV stabilized.
Not ideal for
- Sliding or wear parts. It scratches and wears easily, so use acetal.
- Contact with many solvents, gasoline, alkalis, or ammonia. It can craze, especially when machined or under load.
- Long-term use above about 100–120°C.
Typical applications
Machine guards and covers
Sheet that can take a hit from a tool or a part.
Sight windows
Shelf stock is transparent, so someone can see the work.
Housings
Covers and equipment panels where impact matters more than wear.
Shop fixtures
Useful when the fixture may be knocked. Not the right call for a sliding surface.
FAQ
What is polycarbonate sheet used for?
Guards, covers, sight windows, housings, and fixtures where impact resistance matters. Clear sheet is used when you need to see through the part. Wear and sliding parts are usually a better fit for acetal.
Does it stay clear outdoors?
The TUFFAK GP technical data sheet describes the sheet as UV stabilized. Read that sheet before you specify it for outdoor glazing. A different grade is a sourcing request.
What thicknesses do you stock?
Shelf stock is transparent TUFFAK GP in 48 × 48 inch sheets at 0.118, 0.177, and 0.236 inch. We cut blanks from those sheets. Another thickness, size, or color is a sourcing request.
How should I use the property numbers?
They are typical published values for unfilled polycarbonate, including a long-term service temperature of about 100–120°C. Heat deflection (about 130–135°C) is a different, higher number. They are not a certificate for a specific lot. Use the TUFFAK GP technical data sheet on this page, and confirm the lot you receive.
Can you get a named brand or another plastic?
Shelf stock is TUFFAK GP. If your spec calls for another brand or grade, put that on the request. If it is not what we stock, send it as a sourcing request.
Quote this sheet
Thickness, blank size, and quantity. If the callout is a grade we do not stock, use the sourcing desk instead.