In stock · Sheet
Delrin sheet, cut to size
Acetal homopolymer sheet for machine shops. We cut blanks from sheet for gears, bushings, wear parts, and fixtures.
Also stocked: Polycarbonate sheet

Overview
Delrin is a trade name for acetal homopolymer, a polyoxymethylene (POM). It is not the same resin as acetal copolymer. The sheet on this page is Delrin 150, natural. Ensinger's name for that grade is TECAFORM AD natural. If your print names a copolymer, or a different grade, say so when you ask for a quote.
Shops use it where a part has to stay size-stable and run with low friction. Natural resin is opaque and off-white. It machines cleanly. It is a poor choice for strong acids and oxidizing chemicals.
Blue Ocean Materials stocks 1/8 inch sheet in 48 × 96 inch sheets and cuts it to the blank you send. Other thicknesses, rod, tube, and other plastics are a sourcing request, not shelf stock.
Key properties
Figures are typical published values for unfilled grades, for orientation only. They are not a mill certificate and they are not a promise for the lot on your order. Confirm the datasheet for the sheet you receive. Continuous service temperatures are typical long-term ratings from sheet datasheets, and heat deflection is a different, higher number. Read the temperature guide.
| Property | Value |
|---|---|
| Polymer | Acetal homopolymer (POM). Delrin is a trade name, not a generic name for every acetal. |
| Form we stock | Sheet, cut to your blank. |
| Density | About 1.41–1.42 g/cm³ for unfilled homopolymer. |
| Tensile strength at yield | About 70–76 MPa for unfilled homopolymer. |
| Stiffness | Flexural modulus about 2.8–3.1 GPa for unfilled homopolymer. |
| Water absorption, 24 h | About 0.2–0.25%. |
| Continuous service temperature | About 82–85°C long-term. Short excursions to about 120–150°C are possible depending on grade and load. Design from the grade datasheet, not from this row. |
| Friction | Low against steel when running dry. Test the pair you actually run. |
| Appearance | Opaque. Natural color is off-white. |
| Chemicals | Holds up to many fuels, oils, and solvents. Do not specify it for strong acids or oxidizers. |
| Thicknesses in stock | 1/8 inch. |
| Full sheet sizes | 48 × 96 inches. |
| Grade | Delrin 150, natural. Ensinger TECAFORM AD natural. The safety data sheet and technical data sheet are linked on this page. |
Spec sheets
Safety
Safety data sheet (PDF, opens in a new tab)Delrin 150 series, natural, thin gauge. Dated January 20, 2022.
Technical
Technical data sheet (PDF, opens in a new tab)Ensinger TECAFORM AD natural (Delrin 150).
Best for
- Gears, cams, and sprockets that need stiffness and fatigue resistance.
- Bushings, rollers, and wear pads running dry or lightly lubricated against steel.
- Tight-tolerance machined parts. It cuts cleanly and absorbs little water, so it holds size.
- Jigs, fixtures, nests, and soft jaws that must be rigid and not mar the work.
- Parts exposed to fuels, oils, and many solvents.
Not ideal for
- Sustained heat above about 85°C.
- Strong acids, strong bases, and oxidizers such as chlorine.
- Parts that need transparency or high impact toughness.
Typical applications
Gears, bushings, and rollers
Low friction against metal when the contact can run dry.
Wear strips and guides
Holds a machined edge better than a soft olefin sheet.
Fixtures, nests, and jaws
Stable size for shop tooling and inspection fixtures.
Fuel and solvent parts
A common choice around fuels and many solvents. Not a choice for strong acids or oxidizers.
FAQ
Is Delrin the same as acetal?
Delrin is a trade name for acetal homopolymer, a polyoxymethylene (POM). Acetal copolymer is a different resin. The sheet linked here is Delrin 150, natural (Ensinger TECAFORM AD natural). If your print names a copolymer or a different grade, say so on the quote.
What is Delrin sheet used for?
Machined gears, bushings, rollers, wear strips, fixtures, and other parts that need low friction and stable size. It is opaque. Natural resin is off-white.
What thicknesses do you stock?
Shelf stock is 1/8 inch sheet, 48 × 96 inches, in Delrin 150, natural. We cut blanks from that sheet. Another thickness is a sourcing request. Include the blank size and the tolerance from your print in the quote request.
Are the property numbers a certification?
No. The table is typical published data for unfilled acetal homopolymer, not a mill certificate for the sheet on your order. Use the technical data sheet on this page, and confirm the lot you receive before you design to a number.
What if I need rod, or a different plastic?
Shelf stock is Delrin sheet and polycarbonate sheet. Rod and other resins are a sourcing request.
Quote this sheet
Thickness, blank size, and quantity. If the callout is a grade we do not stock, use the sourcing desk instead.